Hi, Sign in or Register

Home > Access Control > Cards

Standard T5577 RFID PVC ISO Card

Model : T5577 ISO Blank Cards

(558 Reviews)

Vendor: Beijing Tatwah & Yxcard Smartech Co., Ltd. Top Vendor

SKU# 62993967

ISO Thin card is part of RFID products,which is widely applied to access control ,time attendance system and so on .We manufacture both blank RFID card and pre-printed card. Besides,you can also choose many crafts (Magnetic stripe/signature panel/Laser number/4c printing) for card .

Quantity:

You choose to receive quantity over 10000 will provide 0% spare over warranty.

  • Leadtime
  • Days
  • Package
  • 10
  • Per Carton
  • Warranty
  • 1
  • Years
  • Standard T5577  RFID PVC ISO Card
  • Standard T5577  RFID PVC ISO Card
  • Standard T5577  RFID PVC ISO Card
Added successfully!
Warranty / Spare Item Information

We'll be responsible for the goods within the warranty period ,and will try our best to sastify you .Any questions please contact us .

T5577 ISO Card

Standard Specification

 Physical and optical properties

 

  1.    Dimensions

 Dimensions and tolerances of the  T5577ISO Card are conforming to the norm ISO 7816 and the following drawing.

 

Drawing of the front side and thickness :

 

The thickness will be 0.92mm+/-0.02mm if with overlay.

2.      Card Warping

When a card is posed on a even surface, the highest point of the surface is not allowed to exceed >1,8 mm from the even surface at 20+/- 3℃, RH65+/-10%.

 

3.      ISO / IEC test

  1. Dynamic bending stress :

 


 

As shown in the diagram below, the card is inserted into the testing device and bent from a minimum f of 10mm to a maximum f of 20mm at a rate of 30 times/min. A given face shall be bent 250 times in each of four directions, and then the card flipped over and the bending cycle repeated. After each side has been bent a minimum of 1000 times in this manner , the card shall still be functional and show no cracking.  

                                        

                                                    Figure A.1-Bending test arrangement

 

  1. Dynamic torsion stress:

The short end of the card is fitted into the testing devise , the maximum displacement being through 15° +/- 1° in alternate directions at a rate of 30 torsions per minute. The card shall continue to function and shall not show any creaked part after 1,000 torsions. 

 


                                                                                                    

                                                                                                                     Figure B.1 – Torsion test

 

  1. Appearance :
    1. No obstacle on function with the line wound , stain, change of color , and alien substance attached ,etc.
    2. No lacks on appearance and function
    3. Warp and curl is in regulation.
    4. No notches (over 80u projection) on the edge of the card.
    5. Flatness of card depends on table 1.

 

 Table 1. Card of flatness.  (BD : bumpy degree)

Division

Regulation

Empty area

 Module area

 Antenna area

Bottom side

BD : lowest part

Under 5um

Under 30um

Under 10um

Printing letters

BD : highest part

Under 5um

Under 30um

Under 10um

Surface

BD : lowest part

Under 5um

Under 10um

Under 5um

 

BD : highest part

Under 5um

Under 10um

Under 5um

 

  1.     Performance and Quality
  1. Communication features : The card is maintained parallel to the center of a standard reader/writer antenna ,and the distance between the card and the antenna is changed.

Contactless IC chip

  1. Chip module :  T5577 ISO Card
  2. Operational frequency : 125KHz

 

  1. Communication range : Both read and write operations should be possible within a distance range of 0mm (contact)

To the standard range value.

 

Standard reader /writer

Standard range value (mm)

Standard Temic Card Reader

>50

 

c.   Operating conditions :

  1. There shall be no metal plates within 50cm , and no CRTs such as PC or TV that could become a source of noise within 1 m.
  2. There shall also be no alternating currents that could affect readings or writings.
  3. Operating temperature and humidity :  0℃~50℃, RH : 90%
  4. Normal room temperature and humidity : 23℃, RH : 65%

5. COB and antenna location

 

6. Front/back design printing

The design for the front and back of the card shall be based on a design proof. Printing shall be performed by offset or     

  1.   screen printing, as decided by negotiations.
  2.  

7. Operational temperature

     -10 to 50℃ à General PVC material

      

8. Storage temperature

        -25 to 65℃

  

9. Packaging

  1. The packaging is made in cardboard of 200 units each. 10 cardboard's together are fitting to one box = 2.000 piece.
  2. Cardboard's are neutral. No inscription or advertising marks are glued or fixed. Alone relative data to the quantity and to the date of production are written on the boxes.

 

10. Precautions when using

  1. Do not bend or apply excessive force to the card.
  2. Be careful of the amount of force placed on the card during printing, etc.
  3. In order to preserve stored data , keep cards away from magnets.
  4. Do not store cards on car dashboards or other locations that will become very hot.

 

11. Defective products

      Any cards that do not fall within standard specifications due to defects or errors in manufacture will be replaced with properly working ones.

 

12. Warrantee

      Product warrantee is valid for a period of one year after delivery of the card. This warrantee is not valid in the event of damage or defects due to storage at temperatures of 45℃ or higher, extended exposure to direct sunlight , water, or chemical agents, of the application of excessive force.

 

13.Changes to these specifications

      In the event of that any omissions or errors are discovered in this specification document, we will promptly act to have it corrected.

 

 

   Feature    

Dimension

85.60 x 54mm

Thickness

0.82mm-0.92mm

Material

PVC

Card Surface

Matt/ glossy finish

Housing

Lamination

Working Frequency

125KHz/ 134.2KHz/ 13.56MHz/ 915MHz

Optional chip type

EM4200/ 4102/ 4450/ TK4100/ TK9013/ Temic5577/ S50/ S70/ TKS50/ Ultra-light/ FM11RF08/ Ti2048/ Ti256/ Legic MIM256/ I-code1, I-code SLI/ Hitag1, Hitag2, Hita/ S256, U-code HSL/ U-code-EPC G2 etc.

Work temperature

15C ~ + 55C

ISO cards are waterproof, dustproof, anti-vibration, the temperature of the PET cards can up to +90C

Reading Distance

8cm typically

Data storage time

10 years

   Printing Option

                              Full color offset printing  

                              Silk-screen printing  

                              Metallic Silver/Gold  

   Additional crafts   

Magnetic Stripe Option

300oe, 2750oe, 4000oe

Numbering

Jet dot/ Thermo transfer/ Laser engrave

                              Barcode printing  

                              Signature panel   

   Related products

                            Proximity card, RFID card

                            RFID keyfob, keychain

  Packing

 

                              200pcs/box, 2000pcs/ Carton, 13kg/carton

 

                              Carton size: 50x24x15cm

 

 

 

Applications:

  1. Access control,  attendance control,  identification,  logistic, industrial automation,
  2. skating, tickets, casino token,  membership, public transportation, e-payment, animal tracking,
  3. multi-purpose-card system, catering, swimming pool, laundry, massage center, recreation center.

 

Competitive Advantage:

  1. The best price;
  2. Excellent quality;
  3. Fast delivery;
  4. Large capacity and a wide range of products;
  5. ODM and OEM products according to customer's demand 

Card

  • Card TpyeBar Code, Magnetic Card, IC Card, EM, HID
  • DimensionL85.6×W54×D0.92
  • Optionalsequential numbering, signature panel, Signature panel
  • MaterialPVC
  • Memory Size330 bit
  • Frequency125KHz

200 x Box

Can we custom special size of the cards ?

Yes, please tell us your design size and we need open a new mould ,then we'll send the samples for your confirmation.

Product Review

Overall Rating

98.8%

(Total review: 368)

125 buyers rated
86 buyers rated
12 buyers rated
2 buyers rated
1 buyers rated

Buyer: A****TV 05/02/2015

Looks great. Very classy all-black finish with a very high-end feel. The mesh bracelet has a slim profile that works well for those with small wrists. The dials are beautiful, and the glass and stainless steel case looks pristine. I would love to love this watch, but despite following all directions, it was dead on arrival and would not turn on or function. It's a great-looking piece of jewelry, but not a functioning timepiece. Will be returning. I received this item at a discount in return for my honest review.

(28 of 28 people found this review helpful) Was this review helpful for you? Yes No

Buyer: A****TV 05/02/2015

Looks great. Very classy all-black finish with a very high-end feel. The mesh bracelet has a slim profile that works well for those with small wrists. The dials are beautiful, and the glass and stainless steel case looks pristine. I would love to love this watch, but despite following all directions, it was dead on arrival and would not turn on or function. It's a great-looking piece of jewelry, but not a functioning timepiece. Will be returning. I received this item at a discount in return for my honest review.

(28 of 28 people found this review helpful) Was this review helpful for you? Yes No

Buyer: A****TV 05/02/2015

Looks great. Very classy all-black finish with a very high-end feel. The mesh bracelet has a slim profile that works well for those with small wrists. The dials are beautiful, and the glass and stainless steel case looks pristine. I would love to love this watch, but despite following all directions, it was dead on arrival and would not turn on or function. It's a great-looking piece of jewelry, but not a functioning timepiece. Will be returning. I received this item at a discount in return for my honest review.

(28 of 28 people found this review helpful) Was this review helpful for you? Yes No